Symptom
LG in-refrigerator ice makers in Palm City fail at ice-room seals and fill tubes — not commercial cubers.
- Hollow or cloudy cubes after a skipped filter — not a commercial cuber
- Frozen fill tube starving the harvest cycle
Family-owned · Trusted by Port St. Lucie homeowners
4.7★(348+ Verified Reviews)
BBB
A+ Rated & Accredited
Angi
Super Service / Top Rated
Thumbtack
Top Pro
Nextdoor
Neighborhood Favorite
Licensed & Insured
Local Technicians
Licensed LG ice maker repair in Palm City. We chart Craft Ice and standard ice-room seals, fill-tube freeze-ups, and harvest motors on the truck — call (772) 501-9870 to dispatch.
Call directly or submit the request form below for same-day dispatch. We cover all of Palm City including rural western stretches. Share cross streets when booking so routing is efficient. The diagnostic fee and warranty terms match the rest of the Treasure Coast route. $75 diagnostic, credited 100% toward approved same-visit repair.
Live Dispatch Radar
Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.
Live unit status
Mobile Unit #1 — Dispatched
Current area: Port St. Lucie
⚡ Status: Dispatched & On Call
Pan the radar to your neighborhood (34953, 34986, 34983…).
🚐 Mobile Unit #1 · Port St. Lucie
Local conditions
Symptom, local cause, and how we test — each card stays short for mobile scanning.
LG in-refrigerator ice makers in Palm City fail at ice-room seals and fill tubes — not commercial cubers.
In Palm City, well-influenced water with sediment and iron starves in-refrigerator ice at the inlet screen and solenoid. Hollow cubes are filter and valve work — not a commercial cuber.
Lightning on older rural services west of Martin Highway chatters LG harvest relays and drops fill-valve coil voltage. Freeze-ups after storms are ice-room seal and fill-tube paths — not commercial cubers.
Common failures
Er IF · 1F
Failed ice-room duct fans, frost-bound blades, or ice-room air leaks shut Craft Ice and standard makers down. Reseat the bin and check the gasket before a fan order.
Fill tube / inlet valve
LG ice-maker fill tubes freeze when the ice room leaks or the valve dribbles. Mineral scale from western wellfields aggravates slow fill.
Inlet valve / filter
Tradition and PGA-adjacent wellfield water scales LG valves until cubes go hollow. That is a filter and solenoid job, not a compressor.
Field diagnostics
In-refrigerator ice is a water path first. We confirm supply, filter, solenoid, and fill-tube heat before swapping a module. This is not commercial ice-machine work.
Platform: lg In-refrigerator ice (not a commercial cuber)
| Component | Test | Spec / pass line |
|---|---|---|
| Dual inlet solenoid | Coil ohms and water at the saddle / filter | No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze |
| Fill-tube heater | Heater continuity on DA97-style and similar tubes | Open heater plus a frozen tube is a heater, not a new ice box |
| Harvest motor / thermostat | Module advance and mold thermostat | A clicking module that never harvests is usually the thermostat or a jammed ejector |
Interactive bench check
Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.
Cabinet / evaporator thermistor. Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
Power off. Thermistors are low-voltage NTC beads — do not inject 120 VAC.
Enter the meter reading
Spec: Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page.
Keep / repair: The sealed system is healthy and the job is valve, heater, or module
Replace when: The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet
Hyper-local conditions
Palm City is well water and older electrical. Slow ice is an inlet screen until proven otherwise. Dead 240 V appliances get a panel check. Hidden Oaks and Citrus Boulevard are extended coverage — the ticket carries a window, not a 'be there in an hour' promise. For LG ice makers here: This is the water appliance. Hollow cubes and frozen fill tubes are the local default, not a commercial cuber. Ice-maker fill valves clog with grit; washer screens load rust-tinged debris; dishwashers scale faster than any county-fed Stuart kitchen. Access: Share the cross street and whether the lot is well or county water. We confirm a defined arrival window so a western lot is not treated like Sandpiper Bay.
Private wells west of Martin Highway and toward Citrus Boulevard, plus some county-fed pockets closer to Stuart
Harder, iron-heavier, and dirtier than coastal Martin municipal water — this is sediment, not a light scale film
Ice-maker fill valves clog with grit; washer screens load rust-tinged debris; dishwashers scale faster than any county-fed Stuart kitchen
River-adjacent humidity on the east lots, inland heat on the acreage — milder salt than Jensen Beach
Older 100–200 A services on larger lots were not sized for today’s 240 V dryers and ranges
A 'dead' dryer or oven is a breaker or a loose lug as often as an internal part; door-boot mold still happens on the river side
Hidden Oaks, Citrus Boulevard acreage, Martin Highway corridor
Extended-route window — not an instant same-day hop from the Port St. Lucie shop. Gated Hidden Oaks needs the approved entrance
Share the cross street and whether the lot is well or county water. We confirm a defined arrival window so a western lot is not treated like Sandpiper Bay
On this stop
In Palm City we treat LG ice makers as a lg In-refrigerator ice (not a commercial cuber) job, not a generic appliance call. First meter check: Dual inlet solenoid — Coil ohms and water at the saddle / filter (No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze). Hollow cubes are hydraulics: We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page. Local water is Private wells west of Martin Highway and toward Citrus Boulevard, plus some county-fed pockets closer to Stuart. Harder, iron-heavier, and dirtier than coastal Martin municipal water — this is sediment, not a light scale film. Install reality: Older 100–200 A services on larger lots were not sized for today’s 240 V dryers and ranges A 'dead' dryer or oven is a breaker or a loose lug as often as an internal part; door-boot mold still happens on the river side. Triage on this platform (Follows the host refrigerator): repair when The sealed system is healthy and the job is valve, heater, or module Replace when The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet.
Field dispatch
Structured truck notes — symptom, meter path, parts. Not a star rating.
Verified local repair · Citrus Boulevard acreage, private well
Verified local repair · not a compressor, not a 'Freon charge'
Verified local repair · Hidden Oaks — approved entrance on the ticket
Verified local repair · fill restored on the scheduled window
LG ice maker coverage in Palm City runs Martin Highway, Citrus Boulevard, and Hidden Oaks as an extended Martin County corridor. We confirm a defined window so a rural-lot stop is not treated as an instant same-day hop from the Port St. Lucie hub.
View our full range of Palm City appliance repair services, or explore our dedicated diagnostic hubs for refrigerator ice-maker repair and LG appliance repair. For official municipal context, see the Martin County government website. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.
FAQ · Pay on-site
No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.
We schedule confirmed arrival windows throughout Palm City and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.
Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.
Live Google reviews
Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.