Port St. LucieAppliance Repair

Family-owned · Trusted by Port St. Lucie homeowners

4.7★(348+ Verified Reviews)

St. Lucie County, FL · ZIP 34987
4.7(348+ Verified Reviews)

Samsung Ice Maker Repair inTradition, FL

Licensed Samsung ice maker repair in Tradition in Port St. Lucie. We chart in-refrigerator ice-room RTV silicone seals, DA97 fill-tube heater upgrades, drain-clip extensions, and harvest motors on the truck — call (772) 501-9870 to dispatch.

  • Fast gated-village dispatch through Tradition Town Center, Village Parkway, and Vitalia
  • Stocked for original builder-grade kitchens and later inverter/smart upgrades
  • Stocked with OEM DA97 fill-tube heaters, drain-clip extensions, and harvest motors
  • $75 In-Home Diagnostic · Credited 100% Toward Approved Repair
  • 90-Day Warranty
  • Local Family Technicians
  • 348+ Treasure Coast customer reviews
  • No online prepayment — pay on-site upon diagnostic/approval.

Call directly or submit the request form below for same-day dispatch. Same-day openings are common when you call in the morning or early afternoon. Gated villages need the gate or callbox details on the ticket so the tech is not stuck at the entrance. $75 diagnostic, credited 100% toward approved same-visit repair.

Request Local Service

Fast dispatch across St. Lucie & Martin Counties

No online prepayment — pay on-site upon diagnostic/approval.

Live Dispatch Radar

Active Local Technicians Servicing Port St. Lucie Right Now

Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.

Live unit status

Mobile Unit #1 — Dispatched

Current area: Port St. Lucie

⚡ Status: Dispatched & On Call

Pan the radar to your neighborhood (34953, 34986, 34983…).

  • Same-Day / Next-Day openings when available
  • Zero Travel Surcharge in Port St. Lucie
  • $75.00 Local Diagnostic Fee — 100% Credited

🚐 Mobile Unit #1 · Port St. Lucie

Local conditions

Why Samsung ice makers fail in Tradition

Symptom, local cause, and how we test — each card stays short for mobile scanning.

Symptom

Samsung in-refrigerator ice makers in Tradition fail at ice-room RTV silicone seals and DA97 fill-tube heaters — not commercial cubers.

  • Hollow cubes after a skipped filter — not a commercial cuber
  • Ice-room frost from a failed DA97 fill-tube heater

Local environmental cause

In Tradition, hard municipal wellfield water starves Samsung in-refrigerator ice at the inlet screen and DA97 fill-tube heater. Hollow cubes are filter and valve work — not a commercial cuber.

  • Ice-room RTV silicone seals leaking humid kitchen air
  • Hard municipal wellfield water scaling the DA97 fill-tube heater

Power Surges & Lightning Strikes

Lightning rolling off the interior wetlands along Tradition Parkway chatters Samsung harvest relays and drops fill-valve coil voltage. Freeze-ups after storms are ice-room seal and fill-tube paths — not commercial cubers.

  • Harvest-relay chatter after brownouts
  • Fill-valve coil voltage drop after a sag
  • Ice-room heater circuits after lightning

Common failures

Samsung ice maker faults we chart in Tradition

  • 39E · 39C

    39E / 39C ice-maker function error

    Samsung ice-maker mold sensors and harvest motors fail after fill-tube freeze and ice-room leaks. We verify fill-valve voltage before replacing the assembly.

  • 14E

    14E ice-maker displacement switch

    14E-class ice-maker displacement switches are on the truck diagnostic list. A jammed bucket or failed switch aborts harvest without a sealed-system fault.

  • Drain clip / ice-room seal

    Ice-room drain-clip freeze-up

    Fresh-food ice compartments ice over when seals, drain clips, or auger heaters fail. Hair-dryer defrosts that leave the clip untouched fail again in a week.

Field diagnostics

Samsung Ice Maker bench checks in Tradition

In-refrigerator ice is a water path first. We confirm supply, filter, solenoid, and fill-tube heat before swapping a module. This is not commercial ice-machine work.

Platform: samsung In-refrigerator ice (not a commercial cuber)

ComponentTestSpec / pass line
Dual inlet solenoidCoil ohms and water at the saddle / filterNo water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze
Fill-tube heaterHeater continuity on DA97-style and similar tubesOpen heater plus a frozen tube is a heater, not a new ice box
Harvest motor / thermostatModule advance and mold thermostatA clicking module that never harvests is usually the thermostat or a jammed ejector

Interactive bench check

Compare your meter reading to the field spec

Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.

Cabinet / evaporator thermistor. Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap

Power off. Thermistors are low-voltage NTC beads — do not inject 120 VAC.

Enter the meter reading

Spec: Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap

Call (772) 501-9870
  • Hollow cubes are hydraulics

    We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page.

50% triage · Follows the host refrigerator

Keep / repair: The sealed system is healthy and the job is valve, heater, or module

Replace when: The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet

Hyper-local conditions

Water, climate, and access for Samsung ice makers in Tradition

Tradition is hard wellfield water plus gated-village logistics. Hollow ice and chalky dishwashers are mineral until the meter says otherwise. Closet-installed laundry dies from humidity, not salt. If the gate is not on the ticket, the tech sits on Village Parkway. For Samsung ice makers here: This is the water appliance. Hollow cubes and frozen fill tubes are the local default, not a commercial cuber. Ice-maker inlet screens and fill tubes in three to four years if the filter is skipped; dishwasher spray arms go chalky; washer F-series no-fill codes start at the screens. Access: Village name, visitor gate, and the person who will answer the callbox are mandatory. We stage west from the Port St. Lucie shop so a Tradition stop is sequenced with the other western villages.

Water profile

Western St. Lucie wellfields feeding Tradition, Vitalia, and the 34987 grid

Noticeably harder and more mineral-heavy than the coastal PSL blend — this is the wellfield, not Sandpiper Bay water

Ice-maker inlet screens and fill tubes in three to four years if the filter is skipped; dishwasher spray arms go chalky; washer F-series no-fill codes start at the screens

Coastal climate & install

Inland heat, no beach salt — condensers last longer than Jensen Beach, then die from closet humidity and inverter stress

Tight builder laundry closets on TownPark / LakePark plans trap dryer exhaust and front-load door-boot moisture

Interior-wetland thunderstorms along Tradition Parkway brown-out inverter boards on newer French-doors and DD washers

Community logistics

Tradition Town Center, Village Parkway, Vitalia, Riverland, Lakes of Tradition, Estates at Tradition

Master-planned gates expect a marked van, a resident-authorized visitor pass, and no trailer staging on Village Parkway

Village name, visitor gate, and the person who will answer the callbox are mandatory. We stage west from the Port St. Lucie shop so a Tradition stop is sequenced with the other western villages

On this stop

What we actually prove on a Samsung ice maker in Tradition

In Tradition we treat Samsung ice makers as a samsung In-refrigerator ice (not a commercial cuber) job, not a generic appliance call. First meter check: Dual inlet solenoid — Coil ohms and water at the saddle / filter (No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze). Hollow cubes are hydraulics: We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page. Local water is Western St. Lucie wellfields feeding Tradition, Vitalia, and the 34987 grid. Noticeably harder and more mineral-heavy than the coastal PSL blend — this is the wellfield, not Sandpiper Bay water. Install reality: Tight builder laundry closets on TownPark / LakePark plans trap dryer exhaust and front-load door-boot moisture Interior-wetland thunderstorms along Tradition Parkway brown-out inverter boards on newer French-doors and DD washers. Triage on this platform (Follows the host refrigerator): repair when The sealed system is healthy and the job is valve, heater, or module Replace when The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet.

Field dispatch

Recent Tradition Samsung ice maker case logs

Structured truck notes — symptom, meter path, parts. Not a star rating.

Verified local repair · Vitalia gated village

Samsung Ice Maker: Hollow cubes, ice-room frost, French-door still cooling

Reported symptom
Hollow cubes, ice-room frost, French-door still cooling
Diagnostic steps
  1. Visitor gate authorized before the van left Village Parkway
  2. Inlet screen packed with wellfield mineral
  3. DA97 fill-tube heater open — classic Tradition ice-room freeze
Parts addressed
Inlet screen, filter, DA97 fill-tube heater

Verified local repair · ice harvest restored, sealed system not opened

Verified local repair · PGA Village

Samsung Ice Maker: F7E1 Shift Actuator Fault

Reported symptom
F7E1 Shift Actuator Fault
Diagnostic steps
  1. Entered VMW diagnostic mode — cam never parked.
  2. Tested 0 VDC at the actuator harness at the stall.
  3. Checked bimetal and lid lock in spec.
  4. Pulled agitator: drive hub lugs rounded.
Parts addressed
Shift actuator, drive hub kit

Verified local repair · logged from field dispatch

Coverage in Tradition

Samsung ice maker tickets in Tradition cluster on Tradition Parkway, Village Parkway, and Vitalia. We stage west from the Port St. Lucie shop so a gated-village stop is sequenced with the rest of the western villages corridor.

View our full range of Tradition appliance repair services, or explore our dedicated diagnostic hubs for refrigerator ice-maker repair and Samsung appliance repair. For official municipal context, see the City of Port St. Lucie community resources. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.

FAQ · Pay on-site

Samsung ice maker repair FAQs in Tradition

PricingDo I need to prepay online for Samsung ice maker repair in Tradition?

No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.

SchedulingHow soon can you diagnose Samsung ice maker problems in Tradition?

We offer same-day and next-day dispatch throughout Tradition and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.

DiagnosticsWhat happens during the Samsung ice maker diagnostic visit?
  • Confirm this is in-refrigerator cabinet ice, not a commercial cuber
  • Inspect ice-room RTV silicone seals for humid-air leaks
  • Ohm the DA97 fill-tube heater and drain-clip extension
  • Prove harvest-motor continuity and fill-valve coil voltage before an assembly quote
ReviewsWhat rating does Port St. Lucie Appliance Repair hold for Samsung ice maker repair?

Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.

Live Google reviews

Samsung ice maker repair reviews from Treasure Coast homeowners

Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.

Request Service(772) 501-9870