Symptom
Frigidaire in-refrigerator ice makers in Stuart fail at ice-room seals and fill tubes — not commercial cubers.
- Hollow or cloudy cubes after a skipped filter — not a commercial cuber
- Frozen fill tube starving the harvest cycle
Martin County, FL · ZIP 34994, 34996, 34997
4.7(348+ Verified Reviews)Frigidaire Ice Maker Repair inStuart, FL
Licensed Frigidaire ice maker repair in Stuart. We chart side-by-side and French-door ice-room seals, fill tubes, and mold thermostats on the truck — call (772) 501-9870 to dispatch.
- Fast, local dispatch along the St. Lucie River, North River Shores, and Port Salerno
- Core Martin County route with morning same-day openings from the Port St. Lucie hub
- Stocked with OEM dual-solenoid valves, fill-tube heaters, and harvest motors
- $75 In-Home Diagnostic · Credited 100% Toward Approved Repair
- 90-Day Warranty
- Local Family Technicians
- 348+ Treasure Coast customer reviews
- No online prepayment — pay on-site upon diagnostic/approval.
Call directly or submit the request form below for same-day dispatch. Same-day openings are common when you call in the morning. Stuart is a core part of the regular Treasure Coast route from the Port St. Lucie hub. $75 diagnostic, credited 100% toward approved same-visit repair.
Live Dispatch Radar
Active Local Technicians Servicing Port St. Lucie Right Now
Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.
Live unit status
Mobile Unit #1 — Dispatched
Current area: Port St. Lucie
⚡ Status: Dispatched & On Call
Pan the radar to your neighborhood (34953, 34986, 34983…).
- Same-Day / Next-Day openings when available
- Zero Travel Surcharge in Port St. Lucie
- $75.00 Local Diagnostic Fee — 100% Credited
🚐 Mobile Unit #1 · Port St. Lucie
Local conditions
Why Frigidaire ice makers fail in Stuart
Symptom, local cause, and how we test — each card stays short for mobile scanning.
Local environmental cause
In Stuart, moderate municipal water with a slow mineral load starves in-refrigerator ice at the inlet screen and solenoid. Hollow cubes are filter and valve work — not a commercial cuber.
- Moderate municipal water with a slow mineral load packing inlet screens and fill solenoids
- Ice-room seal leaks that freeze the fill tube — not a commercial cuber
Lightning & Line Voltage
Lightning along the Roosevelt Bridge and Kanner Highway storm corridor chatters Frigidaire harvest relays and drops fill-valve coil voltage. Freeze-ups after storms are ice-room seal and fill-tube paths — not commercial cubers.
- Harvest-relay chatter after brownouts
- Fill-valve coil voltage drop after a sag
- Ice-room heater circuits after lightning
Common failures
Frigidaire ice maker faults we chart in Stuart
Ice maker / inlet valve / mold thermostat
Side-by-side ice maker and inlet valve
Side-by-side ice makers and inlet valves fail after Florida heat soaks. We test the valve, fill tube, and mold thermostat before quoting a complete ice assembly.
Inlet screen / filter
Scale and sediment on aquifer-hard routes
Fort Pierce-adjacent aquifer hardness and Palm City wells both starve Frigidaire ice makers at the inlet screen. Clearing sediment and proving solenoid ohms resolves most no-ice calls before an ice-kit quote.
SY EF
Ice path after SY fan / defrost faults
If the evaporator fan has already iced from an SY-class fault, the ice maker is a symptom. We restore airflow before an ice kit.
Field diagnostics
Frigidaire Ice Maker bench checks in Stuart
In-refrigerator ice is a water path first. We confirm supply, filter, solenoid, and fill-tube heat before swapping a module. This is not commercial ice-machine work.
Platform: frigidaire In-refrigerator ice (not a commercial cuber)
| Component | Test | Spec / pass line |
|---|---|---|
| Dual inlet solenoid | Coil ohms and water at the saddle / filter | No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze |
| Fill-tube heater | Heater continuity on DA97-style and similar tubes | Open heater plus a frozen tube is a heater, not a new ice box |
| Harvest motor / thermostat | Module advance and mold thermostat | A clicking module that never harvests is usually the thermostat or a jammed ejector |
Interactive bench check
Compare your meter reading to the field spec
Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.
Cabinet / evaporator thermistor. Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
Power off. Thermistors are low-voltage NTC beads — do not inject 120 VAC.
Enter the meter reading
Spec: Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
Hollow cubes are hydraulics
We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page.
50% triage · Follows the host refrigerator
Keep / repair: The sealed system is healthy and the job is valve, heater, or module
Replace when: The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet
Hyper-local conditions
Water, climate, and access for Frigidaire ice makers in Stuart
Stuart is Martin County municipal water and river humidity. We pull the coil on every garage fridge near the Roosevelt Bridge before a sealed-system sentence. Storm-dead dryers get a fuse check. North River Shores tickets need the bridge note or the van does not fit. For Frigidaire ice makers here: This is the water appliance. Hollow cubes and frozen fill tubes are the local default, not a commercial cuber. Dishwasher Calrod heaters and washer inlet screens on river-side homes; ice valves clog later than in Tradition but sooner than a brand-new PSL east-side install. Access: Port Salerno is booked as Stuart (34997), not a separate city. Downtown alleys and river-side driveways need a place to leave the van that is not blocking a cafe lot.
Water profile
City of Stuart municipal supply — moderate hardness, not Palm City well sediment and not Tradition wellfield calcium
Slow mineral load that shows up on original equipment in downtown and East Stuart houses, not overnight scale
Dishwasher Calrod heaters and washer inlet screens on river-side homes; ice valves clog later than in Tradition but sooner than a brand-new PSL east-side install
Coastal climate & install
St. Lucie River estuary humidity — downtown, North River Shores, and the Roosevelt Bridge corridor, not just the 'waterfront lot'
Garage and carport refrigerators near the river pick up the coastal Martin corrosion pattern without being on A1A
Storm corridor welds oven and washer boards; a dryer that dies after a cell is almost always the thermal fuse
Community logistics
Downtown Stuart, East Stuart, North River Shores, Port Salerno, Kanner Highway subdivisions
North River Shores private bridges have posted weight limits — we note them before sending a stocked van
Port Salerno is booked as Stuart (34997), not a separate city. Downtown alleys and river-side driveways need a place to leave the van that is not blocking a cafe lot
On this stop
What we actually prove on a Frigidaire ice maker in Stuart
In Stuart we treat Frigidaire ice makers as a frigidaire In-refrigerator ice (not a commercial cuber) job, not a generic appliance call. First meter check: Dual inlet solenoid — Coil ohms and water at the saddle / filter (No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze). Hollow cubes are hydraulics: We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page. Local water is City of Stuart municipal supply — moderate hardness, not Palm City well sediment and not Tradition wellfield calcium. Slow mineral load that shows up on original equipment in downtown and East Stuart houses, not overnight scale. Install reality: Garage and carport refrigerators near the river pick up the coastal Martin corrosion pattern without being on A1A Storm corridor welds oven and washer boards; a dryer that dies after a cell is almost always the thermal fuse. Triage on this platform (Follows the host refrigerator): repair when The sealed system is healthy and the job is valve, heater, or module Replace when The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet.
Field dispatch
Recent Stuart Frigidaire ice maker case logs
Structured truck notes — symptom, meter path, parts. Not a star rating.
Verified local repair · Port Salerno (booked as Stuart, 34997)
Frigidaire Ice Maker: F8E1 no fill, then F7E1 on the next cycle
- Reported symptom
- F8E1 no fill, then F7E1 on the next cycle
- Diagnostic steps
- Both inlet screens packed with Martin County municipal scale
- Pressure-switch hose cracked at the tub stub
- Actuator test passed after hydraulics were restored
- Parts addressed
- Screens, pressure hose; actuator left installed
Verified local repair · VMW codes were water, not a transmission
Verified local repair · North River Shores — private-bridge note on the ticket
Frigidaire Ice Maker: Warm fresh food, 22C, garage install near the river
- Reported symptom
- Warm fresh food, 22C, garage install near the river
- Diagnostic steps
- Confirmed van weight against the posted bridge limit
- Estuary air had packed the rear coil
- Fresh-food fan tach missing after ice was cleared from the duckbill
- Parts addressed
- Coil clean, drain path, evaporator fan
Verified local repair · inverter not replaced
Coverage in Stuart
Frigidaire ice maker calls in Stuart follow US-1, Kanner Highway, and the Roosevelt Bridge corridor, then Port Salerno and East Stuart when the window allows a downtown grouping.
View our full range of Stuart appliance repair services, or explore our dedicated diagnostic hubs for refrigerator ice-maker repair and Frigidaire appliance repair. For official municipal context, see the City of Stuart official website. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.
FAQ · Pay on-site
Frigidaire ice maker repair FAQs in Stuart
PricingDo I need to prepay online for Frigidaire ice maker repair in Stuart?
No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.
SchedulingHow soon can you diagnose Frigidaire ice maker problems in Stuart?
We offer same-day and next-day dispatch throughout Stuart and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.
DiagnosticsWhat happens during the Frigidaire ice maker diagnostic visit?
- Confirm this is in-refrigerator cabinet ice, not a commercial cuber
- Inspect ice-room seals and auger seating
- Check fill-tube freeze-up and inlet-valve voltage
- Prove mold-thermostat ohms before quoting a harvest kit
ReviewsWhat rating does Port St. Lucie Appliance Repair hold for Frigidaire ice maker repair?
Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.
Live Google reviews
Frigidaire ice maker repair reviews from Treasure Coast homeowners
Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.