Port St. LucieAppliance Repair

Family-owned · Trusted by Port St. Lucie homeowners

4.7★(348+ Verified Reviews)

St. Lucie County, FL · ZIP 34952, 34953, 34983, 34984, 34986, 34987, 34988
4.7(348+ Verified Reviews)

Samsung Ice Maker Repair inPort St. Lucie, FL

Licensed Samsung ice maker repair in Port St. Lucie. We chart in-refrigerator ice-room RTV silicone seals, DA97 fill-tube heater upgrades, drain-clip extensions, and harvest motors on the truck — call (772) 501-9870 to dispatch.

  • Same-day openings from our Port St. Lucie shop when you call before early afternoon
  • Fast, local dispatch across Sandpiper Bay, St. Lucie West, and communities east of US-1
  • Stocked with OEM DA97 fill-tube heaters, drain-clip extensions, and harvest motors
  • $75 In-Home Diagnostic · Credited 100% Toward Approved Repair
  • 90-Day Warranty
  • Local Family Technicians
  • 348+ Treasure Coast customer reviews
  • No online prepayment — pay on-site upon diagnostic/approval.

Call directly or submit the request form below for same-day dispatch. Same-day openings are common east of I-95 and around Sandpiper Bay, St. Lucie West, and Tradition when you call before early afternoon. We text an arrival window so you are not waiting all day. $75 diagnostic, credited 100% toward approved same-visit repair.

Request Local Service

Fast dispatch across St. Lucie & Martin Counties

No online prepayment — pay on-site upon diagnostic/approval.

Live Dispatch Radar

Active Local Technicians Servicing Port St. Lucie Right Now

Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.

Live unit status

Mobile Unit #1 — Dispatched

Current area: Port St. Lucie

⚡ Status: Dispatched & On Call

Pan the radar to your neighborhood (34953, 34986, 34983…).

  • Same-Day / Next-Day openings when available
  • Zero Travel Surcharge in Port St. Lucie
  • $75.00 Local Diagnostic Fee — 100% Credited

🚐 Mobile Unit #1 · Port St. Lucie

Local conditions

Why Samsung ice makers fail in Port St. Lucie

Symptom, local cause, and how we test — each card stays short for mobile scanning.

Symptom

Samsung in-refrigerator ice makers in Port St. Lucie fail at ice-room RTV silicone seals and DA97 fill-tube heaters — not commercial cubers.

  • Hollow cubes after a skipped filter — not a commercial cuber
  • Ice-room frost from a failed DA97 fill-tube heater

Local environmental cause

In Port St. Lucie, moderate municipal water with a slow mineral load starves Samsung in-refrigerator ice at the inlet screen and DA97 fill-tube heater. Hollow cubes are filter and valve work — not a commercial cuber.

  • Ice-room RTV silicone seals leaking humid kitchen air
  • Moderate municipal water with a slow mineral load scaling the DA97 fill-tube heater

Lightning & Line Voltage

Lightning along Becker Road and Prima Vista Boulevard chatters Samsung harvest relays and drops fill-valve coil voltage. Freeze-ups after storms are ice-room seal and fill-tube paths — not commercial cubers.

  • Harvest-relay chatter after brownouts
  • Fill-valve coil voltage drop after a sag
  • Ice-room heater circuits after lightning

Common failures

Samsung ice maker faults we chart in Port St. Lucie

  • 39E · 39C

    39E / 39C ice-maker function error

    Samsung ice-maker mold sensors and harvest motors fail after fill-tube freeze and ice-room leaks. We verify fill-valve voltage before replacing the assembly.

  • 14E

    14E ice-maker displacement switch

    14E-class ice-maker displacement switches are on the truck diagnostic list. A jammed bucket or failed switch aborts harvest without a sealed-system fault.

  • Drain clip / ice-room seal

    Ice-room drain-clip freeze-up

    Fresh-food ice compartments ice over when seals, drain clips, or auger heaters fail. Hair-dryer defrosts that leave the clip untouched fail again in a week.

Field diagnostics

Samsung Ice Maker bench checks in Port St. Lucie

In-refrigerator ice is a water path first. We confirm supply, filter, solenoid, and fill-tube heat before swapping a module. This is not commercial ice-machine work.

Platform: samsung In-refrigerator ice (not a commercial cuber)

ComponentTestSpec / pass line
Dual inlet solenoidCoil ohms and water at the saddle / filterNo water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze
Fill-tube heaterHeater continuity on DA97-style and similar tubesOpen heater plus a frozen tube is a heater, not a new ice box
Harvest motor / thermostatModule advance and mold thermostatA clicking module that never harvests is usually the thermostat or a jammed ejector

Interactive bench check

Compare your meter reading to the field spec

Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.

Cabinet / evaporator thermistor. Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap

Power off. Thermistors are low-voltage NTC beads — do not inject 120 VAC.

Enter the meter reading

Spec: Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap

Call (772) 501-9870
  • Hollow cubes are hydraulics

    We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page.

50% triage · Follows the host refrigerator

Keep / repair: The sealed system is healthy and the job is valve, heater, or module

Replace when: The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet

Hyper-local conditions

Water, climate, and access for Samsung ice makers in Port St. Lucie

Port St. Lucie jobs are shop-adjacent. We treat canal-side condensers and Becker-corridor surge boards as the default, not a generic 'Florida humidity' note. Water here is the city blend: scale shows up late, ice rooms freeze from moisture, and gated St. Lucie West stops need the village name before the van rolls. For Samsung ice makers here: This is the water appliance. Hollow cubes and frozen fill tubes are the local default, not a commercial cuber. Dishwasher and washer heaters in 1990s–2000s homes; ice-maker valves last longer here and then fail from humidity freeze-ups rather than calcium alone. Access: Put the village name and the preferred gate on the ticket. Daytime radar pockets run Village Parkway, Crosstown, River Park / White City, then Sandpiper Bay — we do not bounce I-95 twice in one window.

Water profile

Port St. Lucie Utility Systems blended surface and groundwater (not the western wellfield)

Milder than Tradition or Palm City wells, but still a slow mineral load east of Crosstown Parkway

Dishwasher and washer heaters in 1990s–2000s homes; ice-maker valves last longer here and then fail from humidity freeze-ups rather than calcium alone

Coastal climate & install

Estuary and canal air — Sandpiper Bay, the C-24, and homes east of US-1 sit in brackish moisture

Garage refrigerators with louvered doors pull humid canal air across rear coils around the clock

Condenser fins pit; outdoor dryer flappers seize; lightning along Becker Road and Prima Vista Boulevard welds control boards

Community logistics

St. Lucie West, PGA Village, Tesoro, Torino, and HOA streets off Gatlin and Becker

Marked service van; contractor insurance packet ready for St. Lucie West and PGA security desks

Put the village name and the preferred gate on the ticket. Daytime radar pockets run Village Parkway, Crosstown, River Park / White City, then Sandpiper Bay — we do not bounce I-95 twice in one window

On this stop

What we actually prove on a Samsung ice maker in Port St. Lucie

In Port St. Lucie we treat Samsung ice makers as a samsung In-refrigerator ice (not a commercial cuber) job, not a generic appliance call. First meter check: Dual inlet solenoid — Coil ohms and water at the saddle / filter (No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze). Hollow cubes are hydraulics: We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page. Local water is Port St. Lucie Utility Systems blended surface and groundwater (not the western wellfield). Milder than Tradition or Palm City wells, but still a slow mineral load east of Crosstown Parkway. Install reality: Garage refrigerators with louvered doors pull humid canal air across rear coils around the clock Condenser fins pit; outdoor dryer flappers seize; lightning along Becker Road and Prima Vista Boulevard welds control boards. Triage on this platform (Follows the host refrigerator): repair when The sealed system is healthy and the job is valve, heater, or module Replace when The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet.

Field dispatch

Recent Port St. Lucie Samsung ice maker case logs

Structured truck notes — symptom, meter path, parts. Not a star rating.

Verified local repair · Sandpiper Bay canal lot

Samsung Ice Maker: Fresh food warm, freezer still frozen, 22E on the display

Reported symptom
Fresh food warm, freezer still frozen, 22E on the display
Diagnostic steps
  1. Pulled the lower grille — canal dust packed the condenser
  2. Commanded defrost; drain-clip heater open, duckbill iced
  3. Ice-room gasket failed a paper test at the DA97 fill-tube corner
Parts addressed
Drain-clip heater, evaporator-fan retest, ice-room gasket reseal — inverter left in place

Verified local repair · cooling restored without a compressor

Verified local repair · St. Lucie West HOA laundry closet

Samsung Ice Maker: OE drain timeout, standing water, musty boot

Reported symptom
OE drain timeout, standing water, musty boot
Diagnostic steps
  1. Pulled the pump — lint wad at the impeller
  2. Checked standpipe height against LG spec
  3. 12/6 basket play before promising a cheap pump-only
Parts addressed
Drain pump and boot clean; spider within spec

Verified local repair · OE cleared, no main-board swap

Coverage in Port St. Lucie

Samsung ice maker stops in Port St. Lucie are grouped along Crosstown Parkway, Becker Road, Prima Vista Boulevard, and US-1, then loop Gatlin Boulevard and Village Parkway so a tech is not crossing I-95 twice in one window.

View our full range of Port St. Lucie appliance repair services, or explore our dedicated diagnostic hubs for refrigerator ice-maker repair and Samsung appliance repair. For official municipal context, see the City of Port St. Lucie official website. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.

FAQ · Pay on-site

Samsung ice maker repair FAQs in Port St. Lucie

PricingDo I need to prepay online for Samsung ice maker repair in Port St. Lucie?

No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.

SchedulingHow soon can you diagnose Samsung ice maker problems in Port St. Lucie?

We offer same-day and next-day dispatch throughout Port St. Lucie and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.

DiagnosticsWhat happens during the Samsung ice maker diagnostic visit?
  • Confirm this is in-refrigerator cabinet ice, not a commercial cuber
  • Inspect ice-room RTV silicone seals for humid-air leaks
  • Ohm the DA97 fill-tube heater and drain-clip extension
  • Prove harvest-motor continuity and fill-valve coil voltage before an assembly quote
ReviewsWhat rating does Port St. Lucie Appliance Repair hold for Samsung ice maker repair?

Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.

Live Google reviews

Samsung ice maker repair reviews from Treasure Coast homeowners

Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.

Request Service(772) 501-9870