Family-owned · Trusted by Port St. Lucie homeowners
4.7★(348+ Verified Reviews)
BBB
A+ Rated & Accredited
Angi
Super Service / Top Rated
Thumbtack
Top Pro
Nextdoor
Neighborhood Favorite
Licensed & Insured
Local Technicians
Licensed Maytag dishwasher repair in Port St. Lucie. We chart 4-blade stainless chopper assemblies, micro-filtration sumps, optical turbidimeter soil sensors, and Calrod heaters with inline thermal cutoffs on the truck — call (772) 501-9870 to dispatch.
Call directly or submit the request form below for same-day dispatch. Same-day openings are common east of I-95 and around Sandpiper Bay, St. Lucie West, and Tradition when you call before early afternoon. We text an arrival window so you are not waiting all day. $75 diagnostic, credited 100% toward approved same-visit repair.
Live Dispatch Radar
Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.
Live unit status
Mobile Unit #1 — Dispatched
Current area: Port St. Lucie
⚡ Status: Dispatched & On Call
Pan the radar to your neighborhood (34953, 34986, 34983…).
🚐 Mobile Unit #1 · Port St. Lucie
Local conditions
Symptom, local cause, and how we test — each card stays short for mobile scanning.
Humid toe-kicks from Sandpiper Bay to St. Lucie West trip Maytag leak sensors on condensate while the 4-blade chopper packs with food waste. We clear the macerator before condemning a control.
In Port St. Lucie, moderate municipal water with a slow mineral load crusts Calrod heaters and upper spray-arm nozzles. Debris packed behind the 4-blade stainless chopper looks like a dead wash motor until the macerator is cleared.
Storm flickers along Becker Road and Prima Vista Boulevard weld Maytag wash relays and open the Calrod thermal cutoff. We amp the circulation motor before a CCU swap.
Common failures
Chopper / wash motor
Maytag dishwashers in western Port St. Lucie and Tradition chew bone and plastic in a 4-blade stainless chopper until the wash motor sounds dead. Homeowners see a full tub, a humming circulation pump, and greasy glasses — we pull the lower arm and clear the macerator before a control is quoted.
Spray arms / inlet valve
Chalky glasses and white film on the upper rack are what the homeowner sees when hard municipal water crusts Maytag spray-arm nozzles and the Calrod heater. The pump is usually still in spec — we descale the jets and megger the heater before calling it a dead wash motor.
Door latch
The door looks dead and the keypad will not wake because eight-month humidity seasons swell wood cabinets and pull the Maytag strike off the latch. Realign the strike and prove the latch switch before a control board is blamed for a door that never made up.
Field diagnostics
Dishwasher calls start in the sump. We pull the filter, spin the chopper, and ohm the heater before talking about a wash motor. Cloudy glassware in this climate is usually mineral, not a failed rack.
Platform: maytag Circulation + heat + drain
| Component | Test | Spec / pass line |
|---|---|---|
| Circulation / wash motor | Running amps and impeller freedom at the sump | A quiet motor with no spray is usually a chopper or air gap, not a dead stator |
| Heater / NTC | Heater ohms; NTC ~10 kΩ at room temp on most platforms | Open heater or an NTC that has drifted explains lukewarm cycles better than a 'bad board' guess |
| Drain path | Air-gap / disposer knockout and pump watts | Standing water with a spinning pump is a hose or air-gap restriction |
Interactive bench check
Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.
Compressor or motor start capacitor. Example 108 µF nameplate ±10% (97–119 µF). Always compare to the can — a 35 µF motor cap is a different window
Capacitors store a shock. Short the terminals with an insulated screwdriver after unplugging. Do not use the ohm range as a substitute for a µF meter.
Enter the meter reading
Spec: Example 108 µF nameplate ±10% (97–119 µF). Always compare to the can — a 35 µF motor cap is a different window
Hard or well-influenced water crusts heaters and spray-arm ports. We descale and amp the motor before quoting a circulation assembly.
Keep / repair: Tub is intact and the job is pump, heater, float, or a control
Replace when: Rust-through at the tub, a leaking door gasket on a rusted liner, or a sealed wash motor whose price is already half a new unit
Hyper-local conditions
Port St. Lucie jobs are shop-adjacent. We treat canal-side condensers and Becker-corridor surge boards as the default, not a generic 'Florida humidity' note. Water here is the city blend: scale shows up late, ice rooms freeze from moisture, and gated St. Lucie West stops need the village name before the van rolls. For Maytag dishwashers here: Heaters and spray-arm ports crust; chalky glass is a descale until the wash motor amps out of spec. Dishwasher and washer heaters in 1990s–2000s homes; ice-maker valves last longer here and then fail from humidity freeze-ups rather than calcium alone. Access: Put the village name and the preferred gate on the ticket. Daytime radar pockets run Village Parkway, Crosstown, River Park / White City, then Sandpiper Bay — we do not bounce I-95 twice in one window.
Port St. Lucie Utility Systems blended surface and groundwater (not the western wellfield)
Milder than Tradition or Palm City wells, but still a slow mineral load east of Crosstown Parkway
Dishwasher and washer heaters in 1990s–2000s homes; ice-maker valves last longer here and then fail from humidity freeze-ups rather than calcium alone
Estuary and canal air — Sandpiper Bay, the C-24, and homes east of US-1 sit in brackish moisture
Garage refrigerators with louvered doors pull humid canal air across rear coils around the clock
Condenser fins pit; outdoor dryer flappers seize; lightning along Becker Road and Prima Vista Boulevard welds control boards
St. Lucie West, PGA Village, Tesoro, Torino, and HOA streets off Gatlin and Becker
Marked service van; contractor insurance packet ready for St. Lucie West and PGA security desks
Put the village name and the preferred gate on the ticket. Daytime radar pockets run Village Parkway, Crosstown, River Park / White City, then Sandpiper Bay — we do not bounce I-95 twice in one window
On this stop
In Port St. Lucie we treat Maytag dishwashers as a maytag Circulation + heat + drain job, not a generic appliance call. First meter check: Circulation / wash motor — Running amps and impeller freedom at the sump (A quiet motor with no spray is usually a chopper or air gap, not a dead stator). Scale looks like a dead wash motor: Hard or well-influenced water crusts heaters and spray-arm ports. We descale and amp the motor before quoting a circulation assembly. Local water is Port St. Lucie Utility Systems blended surface and groundwater (not the western wellfield). Milder than Tradition or Palm City wells, but still a slow mineral load east of Crosstown Parkway. Install reality: Garage refrigerators with louvered doors pull humid canal air across rear coils around the clock Condenser fins pit; outdoor dryer flappers seize; lightning along Becker Road and Prima Vista Boulevard welds control boards. Triage on this platform (8–12 years): repair when Tub is intact and the job is pump, heater, float, or a control Replace when Rust-through at the tub, a leaking door gasket on a rusted liner, or a sealed wash motor whose price is already half a new unit.
Field dispatch
Structured truck notes — symptom, meter path, parts. Not a star rating.
Verified local repair · Sandpiper Bay canal lot
Verified local repair · cooling restored without a compressor
Verified local repair · St. Lucie West HOA laundry closet
Verified local repair · OE cleared, no main-board swap
Maytag dishwasher stops in Port St. Lucie are grouped along Crosstown Parkway, Becker Road, Prima Vista Boulevard, and US-1, then loop Gatlin Boulevard and Village Parkway so a tech is not crossing I-95 twice in one window.
View our full range of Port St. Lucie appliance repair services, or explore our dedicated diagnostic hubs for dishwasher repair and Maytag appliance repair. For official municipal context, see the City of Port St. Lucie official website. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.
FAQ · Pay on-site
No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.
We offer same-day and next-day dispatch throughout Port St. Lucie and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.
Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.
Live Google reviews
Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.