Symptom
Frigidaire in-refrigerator ice makers in Jensen Beach fail at ice-room seals and fill tubes — not commercial cubers.
- Hollow or cloudy cubes after a skipped filter — not a commercial cuber
- Frozen fill tube starving the harvest cycle
Martin County, FL · ZIP 34957
4.7(348+ Verified Reviews)Frigidaire Ice Maker Repair inJensen Beach, FL
Licensed Frigidaire ice maker repair in Jensen Beach. We chart side-by-side and French-door ice-room seals, fill tubes, and mold thermostats on the truck — call (772) 501-9870 to dispatch.
- Fast coastal dispatch from Indian River Drive to the Jensen Beach Causeway
- Salt-air ready service from lagoon-front homes to set-back golf-community estates
- Stocked with OEM dual-solenoid valves, fill-tube heaters, and harvest motors
- $75 In-Home Diagnostic · Credited 100% Toward Approved Repair
- 90-Day Warranty
- Local Family Technicians
- 348+ Treasure Coast customer reviews
- No online prepayment — pay on-site upon diagnostic/approval.
Call directly or submit the request form below for same-day dispatch. Same-day openings are common when you call in the morning. Coastal coil cleaning is part of refrigeration calls near the water, not an upsell. $75 diagnostic, credited 100% toward approved same-visit repair.
Live Dispatch Radar
Active Local Technicians Servicing Port St. Lucie Right Now
Live coverage across Tradition, St. Lucie West, Sandpiper Bay, and the greater Treasure Coast — track Mobile Unit #1 and confirm your ZIP before you request service.
Live unit status
Mobile Unit #1 — Dispatched
Current area: Port St. Lucie
⚡ Status: Dispatched & On Call
Pan the radar to your neighborhood (34953, 34986, 34983…).
- Same-Day / Next-Day openings when available
- Zero Travel Surcharge in Port St. Lucie
- $75.00 Local Diagnostic Fee — 100% Credited
🚐 Mobile Unit #1 · Port St. Lucie
Local conditions
Why Frigidaire ice makers fail in Jensen Beach
Symptom, local cause, and how we test — each card stays short for mobile scanning.
Local environmental cause
In Jensen Beach, well-influenced water with sediment and iron starves in-refrigerator ice at the inlet screen and solenoid. Hollow cubes are filter and valve work — not a commercial cuber.
- Well-influenced water with sediment and iron packing inlet screens and fill solenoids
- Ice-room seal leaks that freeze the fill tube — not a commercial cuber
Lightning & Line Voltage
Lightning this close to the Indian River Lagoon chatters Frigidaire harvest relays and drops fill-valve coil voltage. Freeze-ups after storms are ice-room seal and fill-tube paths — not commercial cubers.
- Harvest-relay chatter after brownouts
- Fill-valve coil voltage drop after a sag
- Ice-room heater circuits after lightning
Common failures
Frigidaire ice maker faults we chart in Jensen Beach
Ice maker / inlet valve / mold thermostat
Side-by-side ice maker and inlet valve
Side-by-side ice makers and inlet valves fail after Florida heat soaks. We test the valve, fill tube, and mold thermostat before quoting a complete ice assembly.
Inlet screen / filter
Scale and sediment on aquifer-hard routes
Fort Pierce-adjacent aquifer hardness and Palm City wells both starve Frigidaire ice makers at the inlet screen. Clearing sediment and proving solenoid ohms resolves most no-ice calls before an ice-kit quote.
SY EF
Ice path after SY fan / defrost faults
If the evaporator fan has already iced from an SY-class fault, the ice maker is a symptom. We restore airflow before an ice kit.
Field diagnostics
Frigidaire Ice Maker bench checks in Jensen Beach
In-refrigerator ice is a water path first. We confirm supply, filter, solenoid, and fill-tube heat before swapping a module. This is not commercial ice-machine work.
Platform: frigidaire In-refrigerator ice (not a commercial cuber)
| Component | Test | Spec / pass line |
|---|---|---|
| Dual inlet solenoid | Coil ohms and water at the saddle / filter | No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze |
| Fill-tube heater | Heater continuity on DA97-style and similar tubes | Open heater plus a frozen tube is a heater, not a new ice box |
| Harvest motor / thermostat | Module advance and mold thermostat | A clicking module that never harvests is usually the thermostat or a jammed ejector |
Interactive bench check
Compare your meter reading to the field spec
Ohm, kΩ, µF, or voltage — not an error-code lookup. Pick the component, enter what the meter shows, and we will tell you whether the control board is being lied to.
Cabinet / evaporator thermistor. Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
Power off. Thermistors are low-voltage NTC beads — do not inject 120 VAC.
Enter the meter reading
Spec: Typically 5–12 kΩ at ~77°F (25°C); confirm against the model chart before a board swap
Hollow cubes are hydraulics
We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page.
50% triage · Follows the host refrigerator
Keep / repair: The sealed system is healthy and the job is valve, heater, or module
Replace when: The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet
Hyper-local conditions
Water, climate, and access for Frigidaire ice makers in Jensen Beach
Jensen Beach is salt first. A warm refrigerator on A1A is a coil until the fins are proven. Well-side Rio lots add iron grit that A1A condos never see. Country Club stops need the guardhouse name on the ticket; island jobs are a different schedule. For Frigidaire ice makers here: This is the water appliance. Hollow cubes and frozen fill tubes are the local default, not a commercial cuber. Ice-maker and dishwasher valves need both scale and grit checks; Rio wells stain washer screens orange, municipal A1A blocks do not. Access: Rio addresses need a cross street — Indian River Drive numbers are easy to overrun. Hutchinson Island stays on the separate island window, not this ticket.
Water profile
Mix of municipal A1A / Ocean Boulevard blocks and older well-influenced properties on Indian River Drive and Rio
Well-side iron and sediment on the lagoon lots; softer city water a few blocks inland — two different inlet-valve failures on the same street
Ice-maker and dishwasher valves need both scale and grit checks; Rio wells stain washer screens orange, municipal A1A blocks do not
Coastal climate & install
Direct salt air — the single harshest advertised stop. A1A, the causeway, and lagoon-front Indian River Drive
Garage refrigerators within a half-mile of the water pit aluminum fins; dryer terminals facing the lagoon salt-seize at the flapper hinge
Compressor overwork from a packed, pitted coil; front-load door boots mold inside the fold within a year or two; hurricane-season board resets
Community logistics
Indian River Drive / Rio, Jensen Beach Causeway approach, Jensen Beach Country Club / Eagle Marsh, Ocean Boulevard condos
Country Club guardhouse wants contractor ID and a resident call-ahead. Condo decks often ban overnight commercial parking
Rio addresses need a cross street — Indian River Drive numbers are easy to overrun. Hutchinson Island stays on the separate island window, not this ticket
On this stop
What we actually prove on a Frigidaire ice maker in Jensen Beach
In Jensen Beach we treat Frigidaire ice makers as a frigidaire In-refrigerator ice (not a commercial cuber) job, not a generic appliance call. First meter check: Dual inlet solenoid — Coil ohms and water at the saddle / filter (No water at the valve with the house supply open is a valve or filter; no water at the mold is a fill-tube freeze). Hollow cubes are hydraulics: We do not quote an ice maker until the filter, saddle valve, and fill tube are proven. Commercial cubers are a different page. Local water is Mix of municipal A1A / Ocean Boulevard blocks and older well-influenced properties on Indian River Drive and Rio. Well-side iron and sediment on the lagoon lots; softer city water a few blocks inland — two different inlet-valve failures on the same street. Install reality: Garage refrigerators within a half-mile of the water pit aluminum fins; dryer terminals facing the lagoon salt-seize at the flapper hinge Compressor overwork from a packed, pitted coil; front-load door boots mold inside the fold within a year or two; hurricane-season board resets. Triage on this platform (Follows the host refrigerator): repair when The sealed system is healthy and the job is valve, heater, or module Replace when The host refrigerator already fails the sealed-system 50% line — we will not rebuild ice on a dying cabinet.
Field dispatch
Recent Jensen Beach Frigidaire ice maker case logs
Structured truck notes — symptom, meter path, parts. Not a star rating.
Verified local repair · A1A / Ocean Boulevard garage within a half-mile of the water
Frigidaire Ice Maker: Warm box, compressor hot, no error some days
- Reported symptom
- Warm box, compressor hot, no error some days
- Diagnostic steps
- Aluminum fins pitted — salt, not 'needs Freon'
- Inverter DC bus in spec after the coil was cleaned as far as the pits allowed
- Ice-room not in play; this was condenser fatigue
- Parts addressed
- Deep coil clean, condenser fan current check, honest sealed-system watch
Verified local repair · cooling recovered; replacement discussed against the 50% line
Verified local repair · Indian River Drive / Rio well lot
Frigidaire Ice Maker: Slow fill, orange grit on the inlet screen, OE on drain
- Reported symptom
- Slow fill, orange grit on the inlet screen, OE on drain
- Diagnostic steps
- Well-side iron grit — not the municipal A1A water two blocks over
- Pump lint plus a high standpipe
- Spider play checked because of the age
- Parts addressed
- Inlet screens, drain pump; well-filter note
Verified local repair · two water problems, one visit
Coverage in Jensen Beach
Frigidaire ice maker routing in Jensen Beach hugs Indian River Drive, the causeway, and A1A / Ocean Boulevard. Coastal stops are grouped so we are not crossing the lagoon twice in one arrival window.
View our full range of Jensen Beach appliance repair services, or explore our dedicated diagnostic hubs for refrigerator ice-maker repair and Frigidaire appliance repair. For official municipal context, see the Martin County government website. Advertised coverage stays inside Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park — we do not book Hobe Sound or Vero Beach from these pages.
FAQ · Pay on-site
Frigidaire ice maker repair FAQs in Jensen Beach
PricingDo I need to prepay online for Frigidaire ice maker repair in Jensen Beach?
No. No online prepayment — pay on-site upon diagnostic/approval. The in-home diagnostic is $75, credited 100% toward an approved repair on the same visit. A second appliance on the same stop is $35.
SchedulingHow soon can you diagnose Frigidaire ice maker problems in Jensen Beach?
We offer same-day and next-day dispatch throughout Jensen Beach and surrounding neighborhoods, particularly for calls received before 2:00 PM. Our dispatch team coordinates directly with you to provide a tight arrival window.
DiagnosticsWhat happens during the Frigidaire ice maker diagnostic visit?
- Confirm this is in-refrigerator cabinet ice, not a commercial cuber
- Inspect ice-room seals and auger seating
- Check fill-tube freeze-up and inlet-valve voltage
- Prove mold-thermostat ohms before quoting a harvest kit
ReviewsWhat rating does Port St. Lucie Appliance Repair hold for Frigidaire ice maker repair?
Port St. Lucie Appliance Repair holds a 4.7/5 aggregate rating from 348+ Treasure Coast customer reviews.
Live Google reviews
Frigidaire ice maker repair reviews from Treasure Coast homeowners
Pulled from our Google Business Profile (4.7/5 from 348+ Verified Reviews). If Google is briefly unavailable, we show recent local feedback instead — same shop, same number (772) 501-9870.