Port St. LucieAppliance Repair
Request Service(772) 501-9870

Family-owned · Trusted by Port St. Lucie homeowners

4.7★(330+ Verified Reviews)

Maytag Oven / RangeNot Heating

Maytag oven / range not heating repair for Port St. Lucie & the Treasure Coast — charted against Commercial-leaning Whirlpool DNA — VMW actuators, heavy-duty drain pumps, and dryer thermal stacks.

Call (772) 501-9870Request Service
  • Commercial-leaning Whirlpool DNA — VMW actuators
  • Codes F1E1
  • OEM-path parts
  • Same-day openings
  1. Diag.
  2. Est.

Estimate ready — request a service call below.

Factory diagnostic

Error code or symptom → diagnosis → estimate

Flat In-Home Diagnostic — Credited 100% Toward Approved Repair.

  1. 1. Search
  2. 2. Diagnosis
Brand
Category

Human Verification

Complete this check before running a diagnostic.

Estimate & dispatch

Your triage result

Triage summary

ApplianceOven/Range
Brand / ModelMaytag
Fault CodeOn-site diagnosis
Likely IssueBake or Broil Heating Element

Safe pre-check: Oven will not preheat or bake evenly.

Catalog price range

$150 – $250

Component: Bake or Broil Heating Element

Bake or Broil Heating Element

Flat $75 diagnostic credited 100% toward the repair. Exact quote provided on-site after mechanical inspection.

View Tiered Cost Breakdown →
Lifespan Advisory: 12–14 Years Expected

Typical lifespan: 12–14 years. If your unit is under 12 years old, repair is highly economical.

Scan Serial Tag / AI Age Decoder

Flat In-Home Diagnostic — Credited 100% Toward Approved Repair.

Need immediate dispatch or have questions?

(772) 501-9870

Request Service

Name, phone, and ZIP. We call or text you back — no online prepayment.

Oven/RangeMaytagBake or Broil Heating ElementEst: $150 – $250Age: Unverified

Human Verification

Consent is not a condition of purchase. Msg & data rates may apply. Msg frequency varies. Reply STOP to cancel, HELP for info. View our Privacy Policy & Terms.

Call (772) 501-9870

$75 Diagnostic Credited 100% Toward Any Repair · No Online Prepayment · Local Port St. Lucie Techs

Oven will not preheat or bake evenly. On Maytag oven / range platforms we start with fill/drain sensing and thermal-fuse no-heat patterns from St. Lucie West to Stuart, then verify igniter current, infinite switches stuck on high, and control-board relay faults before recommending parts. Common Maytag references on this route include F1E1, F3E2, F06, F8E1/F9E1. We never swap boards or compressors on a guess — Port St. Lucie heat, attic dryer vents, and hard water create failure patterns that look identical to “bad boards” until sensors and airflow are proven. Your $75 in-home diagnostic is 100% credited toward approved repair the same visit. Secondary appliances on the same stop are a flat $35 add-on. No online prepayment — pay on-site upon diagnostic/approval.

Call (772) 501-9870 to request same-day Maytag oven / range service in Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park.

What “Not Heating” usually means on a Maytag Oven / Range

Homeowners describe not heating in a dozen ways. On Maytag hardware the useful split is: a control reporting a sensor, a mechanical load that actually failed, or Florida conditions (heat, humidity, hard water, attic vents, storm voltage) that make a healthy part look dead. We meter igniter current, infinite switches stuck on high, and control-board relay faults against fill/drain sensing and thermal-fuse no-heat patterns from St. Lucie West to Stuart before any board or compressor talk.

If the display shows a factory code, use the error-code library at /troubleshooting/ — F1E1, F3E2, F06, F8E1/F9E1 show up weekly on this brand. If the board is blank, the symptom path on this page still produces a triage summary you can submit with the request-service form. That is a lead, not an online checkout and not a reserved calendar slot.

When DIY is safe — and when to stop

Safe checks: confirm a dedicated outlet, clean the obvious filter or lint path, and listen for a pump or fan that should already be running. Unsafe: gas smell, element stuck on high, standing water at a live machine, microwave door damage, or a refrigerator that has already lost a compartment of food. Those are request-service events, not YouTube jobs.

Age matters on the 50% rule. Decode the rating tag with the appliance age finder at /appliance-age-finder/ if you are weighing repair vs replace. A ten-year oven / range with a cheap sensor is still a repair. The same unit needing a sealed-system or inverter swap may not be.

How a Port St. Lucie diagnostic visit works

Submit the form or call (772) 501-9870. A dispatcher or technician follows up — we do not sell a timed appointment on this website. The in-home diagnostic is $75, credited 100% toward approved same-visit repair. A second appliance is $35. No online prepayment — pay on-site upon diagnostic/approval.

Trucks stock OEM-path parts for Maytag oven / range calls across Port St. Lucie, Tradition, St. Lucie West, Torino, PGA Village, Jensen Beach, Stuart, Fort Pierce, White City, Hutchinson Island, Palm City, and Lakewood Park. Mention HOA gates and parking in the issue field so the tech is not stuck at the call box. Completed repairs carry a 90-day parts and labor warranty.

Safe diagnostic tips

  • Confirm bake vs broil visually on electric models.
  • Check the range breaker and Sabbath mode.
  • Stop using the oven if you smell burning insulation.

Stop DIY if you smell burning, see exposed wiring, or need sealed-system / gas work — request a professional diagnosis above.

About Port St. Lucie Appliance Repair

Quick facts for customers and assistants: 4.7/5 from 330+ reviews · $75.00 diagnostic (credited) · 90-day warranty · serving Tradition, St. Lucie West, Stuart & Port St. Lucie.

Who is Port St. Lucie Appliance Repair?
Port St. Lucie Appliance Repair is a family-owned and family-operated appliance repair business at 2217 SW Gray Beal Ave, Port St. Lucie, FL 34953. Local technicians—not a nationwide call center—serve Port St. Lucie and the Treasure Coast with same-day residential repairs, OEM-quality parts, and 17+ years of hands-on expertise. Call (772) 501-9870.
What is your diagnostic fee and warranty?
The standard in-home diagnostic is $75.00, and it is 100% credited toward your approved repair on the same visit. A second appliance on the same visit adds $35.00. No online prepayment — pay on-site upon diagnostic/approval. Completed repairs include a 90-day parts and labor warranty.
What is your customer rating in Port St. Lucie?
Port St. Lucie Appliance Repair holds a 4.7/5 from 330+ reviews for appliance repair across Port St. Lucie and nearby Treasure Coast communities.
Which neighborhoods and brands do you serve?
We routinely repair appliances in Tradition, St. Lucie West, Stuart, Fort Pierce, Jensen Beach, Palm City, and the wider Port St. Lucie area. Brands include Samsung, LG, Whirlpool, Maytag, GE Profile, KitchenAid, Bosch, Sub-Zero, and other major household lines.
How do I book appliance repair or look up an error code?
Request a service call at https://portstlucieappliancerepair.com/contact/ or call (772) 501-9870. For DIY checks and fault codes, use https://portstlucieappliancerepair.com/troubleshooting/ and brand hubs such as https://portstlucieappliancerepair.com/samsung-appliance-repair/.
Request Service(772) 501-9870